UNIPAL System InformationProduct InformationMore than a pallet...UNIPAL Pallets Performance TestingBecome a UNIPAL License PartnerUNIPAL Insights on ISPM-15Contact Information
  UNIPAL I pallet
  UNIPAL II pallet
  UNIPAL IV-A pallet
  UNIPAL V pallet
  UNIPAL VI pallet


Product Information

UNIPAL represents a patented product line of corrugated pallets manufactured from pallet members. These corrugated lumber members are assembled using a method similar to that used to assemble “Lincoln Logs”. This pallet member construction provides “beam strength” comparable to that found in the construction of wooden pallets.

UNIPAL I pallet

The UNIPAL pallet can be manufactured according to customer's requirements in almost any size from 600mm x 500mm (24 x 20 inches) up to 1900mm x 1530 mm (75 x 60 inches). In addition, the UNIPAL pallet is capable of transporting loads in excess of 1 ton (2,200 pounds) and warehouse stack loads up to 4.5 tons (10,000 pounds).

The UNIPAL I pallet is typically constructed with 8 pallet members and a top sheet, which provides both fork and pallet jack entry and exit. This pallet is truly a “pallet and skid” as it has neither bottom deck boards nor the lattice configuration of the assembled pallet members.

Because of its member strength, the UNIPAL I can be racked (three rails or solid deck racks) and transported over most conveyer systems in all four directions.


Its construction makes the top sheet optional where the load is contained in one or few containers or a bulk bag.


The UNIPAL I design is capable of transporting loads in excess of 1 ton (2,200 pounds) as well as warehouse stack loads up to 4.5 tons (10,000 pounds).